|
Headlight Lens - APRILIA
150mm Glass - Monza, Mark 3 etc
This is a NOS Aprilia 150mm glass
headlight lens found on Ducati Monza, Mark 3 etc etc. Perfect condition.
Do Not choose ANY 'envelope' option for shipping! |
|
CEV 290 / 285 - Tail
Light Lens - Fits Ducati 750F1 + Others
This is a brand new CEV lens for Ducati
750F1 and other models. As we figure out which other models it fits, we
will list them off, but for right now, we know for sure it is identical
to the 750F1. It is in perfect brand new condition, with absolutely no
scuffs or scratches etc. Embossed on the lens is; 290 over the CEV logo
and 285 under, DGM 40766 LPXARLT, SAE LST 85 and some other misc
codes... |
|
CEV18410 Turn Signals
w/Orange Reflector - New Style
Newly made CEV turn signals [with
reflectors] suitable for all bevel drives with 10mm screw on stalk.
These are current production CEV items as supplied by CEV - no logos on
the lens or the body, no part number on body as shown, we need to take
new photos... Remember, these are made by CEV.... |
|
Turn Signals [2] - 80mm
or 120mm Stalk - DOT Approved
Price Per PAIR of Signals - make your
choice in the drop down menu for what you want. The photo shows 1 SHORT
and 1 LONG for comparison. These are DOT approved turn signals, very
high quality and look very similar to the CEV and Aprilia signals found
on many European bikes from the 70s and 80s. Typically you would put 2
long stalk units in the back and 2 short stalk units in the front, or
vice versa. Some bikes you might want 4 short or 4 long.... Whatever you
want, make the choice below and we will send them. Wiring instructions
are included for 1 wire, 2 wire and 3 wire applications. |
|
Rear Indicator Bracket -
900 SS
Rear indicator bracket [for CEV turn
signals] which fits 900SS. I am not sure if this is an original part or
aftermarket but either way it look real good. This is for the bracket
alone, please choose if you want just the bracket or the bracket + 2 CEV
nuts or 4 CEV nuts.... |
|
CEV Indicator Stalk -
900SS & SSD
stainless steel indicator stalks fit
front 900SS and SSD as original but polished stainless steel. Each stalk
includes 2 polished stainless steel nuts. These are REAL nice items.
Ducati #0797.03.453 |
CEV Turn Signals |
Original CEV turn signals [no
reflectors] suitable for all bevel drives with 10mm screw on
stalk. NOS and in perfect condition. With CEV logos on
the body and lens etc - made in the 70's.
|
CEV Turn Signals |
Original CEV turn signals with amber
reflectors suitable for Darmah etc. with 10mm screw on
stalk. NOS and in perfect condition. With CEV logos on
the body and lens etc - made in the 70's. Very limited
supply.
|
|
CEV18410 Orig. Signals w/Red
Reflector
These are complete NOS turn
signals, CEV #18410 with RED reflectors, everything you see
here. We have turned up a VERY limited supply of these, better
get em while you can, I have not seen any for years. These were
used on US spec SD Darmah, 900SS etc. The European version
didn't have reflectors which I also stock... These are in
absolutely perfect condition without a scratch and are complete
and ready to bolt on to your threaded 10mm stalk. |
|
Turn Signal - 80mm Stalk
This is a very inexpensive alternative
to the original CEV turn signals found on bevel drive Ducatis and even
does the part for the elusive Aprilia turn signal found on early
750GT... Sold EACH so please choose the quantity you need from the drop
down menu when you order. |
|
CEV 249 Tail Light Lens -
S2, Mille etc - NOS
This is a New Old Stock #249 CEV tail
light lens - fits S2 & Mille' etc - measures 45mm deep, 85mm tall and
160mm wide.
Ducati #0803.74.380 |
|
CEV 9241 Tail Light Lens
- 450, 750SS, 750 Sport
This is a NOS CEV 9241 tail light lens
- this one is 82.5mm dia and 36mm tall
Ducati #0684.74.380 |
|
Aprilia 4521 Tail Light
Lens - fits SCR, MK3 etc
This is a NOS lens which says APRILIA
MOD 4521 IGM 1054 LPX - it is 84mm dia and 15mm tall.
Ducati #0622.89.123 |
|
Stop/Tail Light - Heavy
Duty 12 Volt Bulb
This is the only bulb that I have been
able to run in the brake light on any of my bevel drive twins. Standard
#1157 bulbs seem to break and/or burn out after a few rides. This one
doesn't immediately fail, it seems to last very long. Fits CEV
9350 etc etc |
|
CEV Tailight - angled back for
750 Sport etc
This is an original CEV tail
light, complete and ready to bolt on to your bike. This has a
black metal back with an oval embossed with CEV on the top and
the back part is angled [not parallel to the lens front]. The
lens front has MOD. DEP. ART-P - 131 1964 BOSATTA BRESCIA
embossed on the front and it is 82mm [3.25"] diameter. Perfect
for your 750 SPORT and other bikes.
Ducati #0684.74.153 |
|
This is an original 130mm long, 58mm
tall and 45mm deep red brake lens that fits lots of different
Italian bikes from the 70's etc. In raised letters, it
says "MOD. DEPOS. ART-P-104 1963 BOSATTA BRESCIA" on the main
lens. On the rectangular reflector up top it says "BOSATTA-F.B.
LUX-2 IGM 2247 C.2"
order: rect-lens-single [do you know the
Ducati part number?] |
|
This is an original 85mm round and
10mm tall red brake lens that fits lots of different Italian
bikes from the 70's etc. In raised letters, it says "MOD.
DEP. ART-P-130 1964 BOSATTA BRESCIA" on the main lens. On
the rectangular reflector up top it says "BOSATTA-F.B. LUX-2 IGM
2247 C.2" order:
round-lens-twin [do you know the Ducati part
number?] |
|
NOS original
CEV 1730 lens covers for the above #18343 and #18410 turn
signals. |
|
CEV #9350 tail light
lens screws [for below lens] - pan head phillips screws
Ducati #0795.74.363
|
|
Reproduction
CEV lens covers [no side reflectors] for CEV #9350 tail
lights. Each lens comes with 2 new screws.
Ducati #0798.74.380
|
|
CEV #9350
original black plastic lens gasket. Goes between the
lens and the tail light body.
Ducati #0795.74.373 |
|
CEV #9350 tail
light grommets. These go between the tail lights
above and the mounting bracket. These will fit all
#9350 tail lights.
Ducati #0621.74.123 |