|
Throttle Cable End Piece
- Slotted Set Screw - 5.4mm DIA
This is a cable end barrel that is
5.4mm diameter, for throttle & choke cables with a slotted set screw.
Use this if you want to modify one of your throttle or choke cable
lengths. Sold EACH. |
|
2 Way Cable Junction
Block [splitter] This is a
replacement cable splitter for throttle and choke cables. 1 cable in, 2
cables out. |
|
Speedometer Cable -
Veglia - Desmo Singles
This speedometer cable is for Ducati
single cylinder bikes with veglia gauges, most desmo models. These are
new old stock parts. |
|
Front Brake Cable
w/switch - Mototrans Ducati - NOS
This is a NEW OLD STOCK [NOS] front
brake cable with switch - fits MOTOTRANS Ducati.
Ducati #0789.54.980 |
|
Rear Brake Cable -
175-250 Singles
Reproduction rear brake cable for all
Ducati 175 - 250 singles - housing length is 410mm, overall cable length
is 570mm long end to end
Ducati #0550.41.200 |
Rear Brake Cables |
Very close to original
replacement cables, includes brake light switch [#795.41.080].
- For 750 GT order #0795.41.200
- For 750 Sport order #0796.41.200
- For 860/900 GT & GTS order
#0960.41.200
|
Throttle Cables |
Dual cable set up [from
throttle to carb] for clip ons
and low euro style bars & dual cable throttles [Tommaselli DAYTONA
2C]. Now made by Motion Pro exclusively for Bevel Heaven.
- Specify for PHF or PHM carbs when
ordering
- For PHF #0797.54.967
& ---.963
- For PHM #0797.54.965
& ---.960
|
|
Throttle Cable - top
piece for SD Darmah This is
the top cable [goes between throttle and junction or splitter unit] on
SD 900 Darmah. May fit other applications as well. Cable sheath = 492mm,
with adj/elbow = 557mm. Inner cable = 645mm.
Ducati # 0801.54.958 |
Tach Cables |
Specify for ND, VEGLIA or
SMITHS gauges when ordering [use part number]
- For ND #0801.37.060 - fits ALL
Ducati with ND gauges
- For Veglia #0795.37.063 - fits all
bevels w/Veglia as well as Allazurra
- For SMITHS #795.37.060 - fits ALL
Ducati with Smiths gauges
|
Speed 0 Cables |
Specify for ND, VEGLIA or
SMITHS gauges when ordering [use part number]
- For ND #0801.38.625 - fits SD,
Pantah, S2, MHR, F1, Allazura etc
- For Veglia #0795.38.627 - fits all
GT/GTS, Allazura, some SS models
- For SMITHS #690.38.625 - fits all GT/GTS/SD
with Smiths gauges
- For SMITHS #684.38.627 - fits all SS
models with Smiths gauges
|
|
Clutch Cable -
widecase singles 1968-74
Nicely made reproduction clutch cable which fits ALL widecase singles
1968 to 1974. May fit other models as well. Overall sheath [outer cover]
length is 1023mm, overall cable length measured end to end including the
lead cable ends = 1200mm. threaded adjuster is 6 x 1.0 threads.
Ducati # 0688.54.990 |
Clutch Cable - SS |
Clutch Cable for all Super
SPort bevel drives with clip ons. Actual length of outer sheath is
40.5" excluding adjuster - measure your original to make sure it will fit!!
Includes cable adj bootie.
- Part #796.54.990 - fits all SS bevels
w/clip on
- Cable sheath is 40.5" long
|
Clutch Cable - Euro |
Clutch Cable for all bevel
drives with clip ons or low euro style bars. Actual length of outer sheath is
43.5" excluding adjuster - measure your original to make sure it will fit!!
Includes cable adj bootie.
- Part #803.54.990 - fits all bevels
w/clip on or Euro style bars
- Cable sheath is 43.5" long
|
Clutch Cable - USA models |
Clutch Cable - GT - USA
Replacement clutch cable, long style for USA "GT" models with high
handlebars. Actual length of outer sheath is 48.5" excluding adjuster -
measure your original to make sure it will fit!! Includes cable adj
bootie.
- Part #0795.54.993 - fits all
bevels tall bars such as GT models
- Cable sheath is 48.5" long
|
* Cable Tune-up Kit
* Clutch, Tach, Speedo,
Throttle Cable Kit |
Includes: [NEW] Clutch,
Speed-0,
Tach-0 and a pair of dual Throttle Cables
Specify:
~ ND, Smiths or Veglia gauges
~ for PHF or PHM carbs
~ bike model / year
(must have a dual cable
throttle & clipons or low rise Euro
bars only)
|