 |
Bodywork Rubber Washer 10 Pack
ID is quarter inch so these are
perfect for all those 6mm screws that hold on bodywork. We like
to use them everywhere between the bodywork and the mounting
brackets to act as a cushion. We silicone them to the bodywork
so they stay put and don't get lost. Buy 1 kit and you get 10
washers. |
Stainless Steel
Fastener Kit
<for roundcase motors> |
70 piece stainless steel
hardware kit for "round case" Ducati bevel drive twin
motors [750GT and 750 Sport].
Replace rusted & corroded stock hardware with these A2-70
stainless fasteners.
Click
Image for details |
Stainless Steel
Fastener Kit
<for squarecase motor w/elec start>
|
86 piece stainless steel
hardware kit for "squarecase" Ducati bevel drive twin motors with
starter motor [Darmah etc] - Replace rusted & corroded stock hardware with these A2-70
stainless fasteners.
Click
Image for details |
Stainless Steel
Fastener Kit
<for squarecase motor w/o elec start>
|
80+ piece stainless steel
hardware kit for non electric start Ducati bevel drive twin motors
[specifically designed for 900SS]
Click
Image for details |
 |
Homologation Tag Rivet
These are the tiny rivets for the
homologation tag on your bevel drive twin. Just in case you mess up the
ones that come in with your new tag or if you simply want to reinstall
your old tag after a frame re-paint. Sold EA so order as many as you
think you might need. |
 |
License Plate Fastener
Kit
Dress up your license plate frame with
our chrome hardware kit which includes 4 each; button head allen screws,
washers, nylock nuts + the allen tool needed. |
 |
Nut Retainer - 750/900SS
Side Cover Fasteners These
are the little captive nut retainer things that snap into the square
hole on your 750SS and 900SS frame for your side covers. These are sold
EACH so please choose the quantity you want [each bike needs 4]. The 8mm
screws that hold your side covers on thread into these. They are a
yellow zinc plating and brand new items. |
 |
Clutch Inspection Cover
Screw Set - Allen Stainless
steel allen head screw fits the clutch inspection cover on both
roundcase and squarecase bevel drive DUCATI. Set comes with 2 screws as
shown.
Ducati #0400.49.030 - A |
 |
Clutch Inspection Cover
Screw Set - Slotted Stainless
steel slotted head screw fits the clutch inspection cover on both
roundcase and squarecase bevel drive DUCATI. Set comes with 2 screws as
shown.
Ducati #0400.49.030 - S |
 |
Intake Manifold Block-off
Screw Set
This little 5mm cheese head screw is
found on just about all bevel drive twins intake manifolds. It is
screwed into the side, and is used to block off the hole used when doing
a carb sync. I have finally found aluminum crush washers and they are in
stock and also available. sold in sets
of 2 screws or 2 screws + 2 crush washers.
Ducati #71264.1298 |
 |
Dash Clamp - 750 Sport
etc
stainless steel clamps - 8mm wide and
expand from 78 to 98mm - FINALLY a nice clamp to replace your corroded
clamps that hold your gauges onto your metal dash around the rubber cups
on your 750 Sport, 860GTS etc etc. |
 |
Dash - Fastener Kit
for 750/900SS
Kit includes a 6mm bodyscrew with white
nylon washer for the front top of the dash, and 2 ea black plastic nylon
screws, nuts and washers for the brackets in back of the dash. This kit
applies to all 750 and 900 Super Sport bevel drive dash installations. |
 |
CEV Indicator Stem Nut
New stainless steel
reproduction nut that locks down the CEV indicators to the stem.
Does not fit aprilia turn signals...
Ducati #0797.03.085 |
 |
Sprocket Carrier Fastener Kit - now
both Disk & Drum
Hub Kits available!
Stainless steel button head allen bolts, nylock nuts and thin AN
washer kit for your sprocket carrier. If you have a bevel drive
with a rear disk brake such as DARMAH, 900SS, 750SS choose DISK
HUB KIT. If you have a bevel drive with a drum brake such as
750GT, 750 Sport, 860GT/E/S, 900GTS etc choose DRUM HUB KIT.
Each kit includes everything you see here - 5 each. These items
bolt your sprocket to your sprocket carrier. |
Case Plug |
Case Plug & Washer. M22 x 1.5 uses
14mm allen wrench. For all singles and twins including Darmah & GTS.
Replaces Ducati #400.49.090
[Doesn't fit BOSCH IGN non electric start twins
M24 upper plug Ducati #769.49.010]
|
Stainless Headbolt Nuts |
Stainless Steel Headbolt Nuts
Precision Machined - these are NOT hardware store nuts, they are
the same size and shape as original as you can see. Fits ALL
bevel drive twins.
|
Cylinder Head Washers |
Wavy washers for under the above
cylinder head nuts
|
Engine Mount Bolts |
Stainless Steel engine mounting
bolts, washers and nylock nuts for bevel drive twins.
Specify either for DARMAH or SS style frame. Machined from
solid stainless. TECHNICAL SPECS: These are 316 (A-4) Stainless
bolts. Forged and shot peened with cut threads, polished cut
washers, polished lock nut. We specified that the grade stamp be
on the bolt heads for no doubt as to the grade quality. The
heads are easy to polish out to a mirror finish if you so
desire. |
 |
Front Sprocket Lock Nut
This is the "KM7" locknut that
secures your countershaft [front] sprocket on ALL bevel drive
twins.
Duacti #76800.3380 |
Countershaft Sprocket Lock Washer |
Lockwasher for bevel drive twins
countershaft nut. |
 |
M14 x 1.0 LH Thread Camnut and
Special M14 Tab Washer - fits all bevel drives. Set
includes 1 ea cam nut and washer.
Ducati #0400.29.040 & #0400.29.050 |
 |
M20 Special Tab Washer for
crankshaft [and clutch basket] - fits all bevel drives
Ducati #0400.47.030 |
 |
Seat Knob - 750 GT
750 GT Seat Knob. This is a very nicely
made reproduction seat knob for your bevel drive. It was made
specifically for this application - it isn;t something 'close' that
works.... It is exact.
Ducati #0795.85.060 |
 |
Marzocchi Steering Damper
Knob
This is a very nicely made reproduction
Marzocchi steering damper knob for your bevel drive. It was made
specifically for this application - it isn;t something 'close' that
works.... It is exact.
Ducati #0689.37.740 |
|
Caliper Bolts & Spacers
For F08/P108 etc to install caliper onto forks or rear caliper
bracket.
[1 set = 2 bolts & 2 spacers to install 1 caliper]
|
 |
Caliper Mount
Spacer - .5mm thick
These little stainless
steel washers are .5mm thick and perfect for aligning the
brake caliper to your rotor. You can also use them as a
normal washer between the bolt head and caliper... Choose
your quantity below - sold EACH.
Ducati #0795.37.096 |
|
CEV #9350 tail light
lens screws [for below lens] - pan head phillips screws
Ducati #0795.74.363
|
 |
Rubber Manifold Clamps
for carbs Stainless steel hose clamp for rubber
manifolds used on some dellorto carbs. These are 7mm wide and operated
between 32mm and 50mm. These fit the rubber manifolds I sell. |
|
Windscreen Screws
|
Black plastic bolts, nuts
and washers for your windscreen
- 5mm x 16mm, Phillips head machine
screw, nut and washer kit
- dampen vibration - prevent cracking
|
|
Center Stand Bolts for all Bevel and
Pantah Twins. Set includes 2 bolts & 2 nylock
nuts. If you are having trouble getting your bike up on the
stand chances are you need new bolts...
Ducati #0795.12.010
|
Rear Axle Nuts/Washers
|
New nuts and washers for all bevel
drive twins. Washers are hardened steel. Nuts and
washers are zinc coated steel. Set includes 2 each washers
and nuts
Ducati #795.77.320 &
#795.77.310
|
Front Axle
|
Front Axle - NOS - fits all bevel
drives with 38mm Marzocchi as well as 38mm Ceriani forks.
Has pull handle for easy removal, CAD plating is bright and shiney,
genuine item.
Ducati # 0795.77.330
[direct replacement for
#797.77.334 which is the style without the pull rod]
|
Center Stand Spring
|
Center Stand Springs for ALL bevel
drives. Also works on side stand.
|
Gas Tank Buttons.
|
Machined
from aluminum. Includes 2 ea buttons, screws, washers and lock washers.
These go on the back of your tank, what the rubber O-ring or bungee
holds the tank to the frame on....
|
Speedo Drive Washer
|
Stainless Steel replacement
speedometer drive washer - goes on the front axle between the speedo drive and your
forks. Get rid of that crushed aluminum washer! Fits ALL bevel
twins.
|
Body Screw Sets
|
Body Screw Kits for 750/900SS,
F1, MHR, Pantah etc
Kits include screws, white plastic
washers & correct white insert nylock nuts.
Click
Image for details
|
