 |
Sump Screen
- Pantah, 750F1, 851, 888 etc
This is an original DUCATI
part still in the factory wrapping. This sump screen oil
filter fits ALL Pantah including 500/600SL, 750F1, 851, 888,
early belt drive 750SS, 750 Paso etc etc.
Ducati Ricambi Originali
#0660.49.800 |
 |
K&N Oil
Filter - All Ducati w/Spin on Oil Filter
This oil filter is made by
K&N for your modern Ducati. It fits ALL Ducati with a spin
on oil filter from the 750F1 forward including 916, 996,
750SS, 900SS, Multistrada, 749 series, 998, 999, all Monster
etc etc. Save by purchasing more than 1... get em for $15
each if you buy 8.... |
 |
K&N Air
Filter Set - fits 750GT with PHF carbs
This is a kit made
up of 2 individual filters that fit directly onto PHF
Dellorto carbies. This specific kit is designed to fit
behind the sidecover on your rear cylinder with no
modification, specifically designed for the 750GT model. One
of the filters is a cylinder shape the other is a cone shape
- both of the intake ends are angled. The cone shape goes on
the rear cylinder. This kit will fit any bevel drive with
PHF carbies. Kit also includes a small packet of K&N filter
oil. |
 |
K&N Engine
Vent Filter - all bevel twins
This little round K&N air
filter slips inside your crankcase vent tube on your bevel
drive twin. The end is rubber, it is around 1.75" diameter
and 1.4" tall. Filter also includes a small packet or K&N
air filter oil. |
Roundcase Oil Screen |
Brand New Sump
Oil Strainer for Roundcase bevel drive twins.
DUCATI part
#0755.49.800 |
Squarecase Oil Screen |
Brand New Sump
Oil Strainer for Squarecase bevel drive twins.
DUCATI part
#0759.49.800 |
 |
Oil Filter - DUCATI
860/900 Bevel Twin
Genuine Ducati Oil Filters, the real
deal, for all 860cc and 900cc Bevel Drive Twins [except those needing
screw on type]. Order 6 and save....
Ducati #0759.49.890 |
Aftermarket Oil Filters |
For all Bevel Drive Twins [except
those needing screw on
type]
aftermarket filter fits and works perfectly at less than half the cost of
OE. Click the image for important notes concerning this filter! |
 |
Oil Filter - all Ducati
w/spin on filter [except below] This filter fits all F1, Pantah, and forward - all Ducati rubber band twins which require a spin on type
oil filter. ATHENA is the company that makes the oild filters that are
branded by DUCATI - these are exactly the same but no DUCATI logo. |
 |
Oil Filter - 1983-4 MHR/S2
900 [dry clutch]
This aftermarket oil filter fits 1983 &
1984 DUCATI MHR & S2 900cc bevel drives with a dry clutch. Ducati
#0671.49.850 |
Fuel Filter - Malossi |
Fuel Filter - Malossi
Clear inline fuel filter by MALOSSI.
Light and durable - fits 7mm fuel line. |
Fuel Filter - OMG/PAIOLI |
Fuel Filter - OMG/PAIOLI
Inline fuel filter by OMG / PAIOLI. These
have plated metal end caps, glass tubes and the filter part inside is a
bit larger than the MALOSSI filters, the exact same diameter as the
filter tubes inside the PAIOLI fuel taps we stock. |
Air Filters - PHF & PHM carbs |
Inexpensive cone style
filters for PHF and PHM carbs - similar to K&N. Chrome ends and just
under 4" long so they will fit behind sidecovers on your bevel
twin. Small but they work. You must spray with filter oil
which is not included. Click
Image for details |
