This is a brand new set of polished and flanged wheels for your bevel drive DUCATI. The front has a DUCATI 4 bolt hub with a 2.15 x 18 MORAD flanged rim that has been polished, 40 spokes. The rear wheels has a DUCATI 4 bolt hub with a 2.50 x 18 MORAD flanged rim that has been polished, 40 spokes and includes the cush drive carrier. Both wheels have the bearings and bearing spacers along with the bolts needed to put everything together. Basically what we have here is a complete wheelset - just add your 4 bolt 280mm rotors, and your wheel spacers and axle then mount to your bike. We stock rotors, rubber rim strips, tires, axles, all available separately.

10ml bottle - enough for 400 spokes give or take. This stuff must be used on the spoke ends before you thread on the nipples to lubricate & bond the threads and to prevent galling.

• all front 18" disk type hub
• all front 19" disk type hub
• all rear 18" disk type hub
• all rear 18" drum type hub
• all 250-450 singles

• 100/90V18 + 120/90V18 [High Performance]
• 100/90V19 + 120/90V18 [High Performance]
• 90/90H18 + 110/90H18 [Sport Touring]
• 100/80H18 + 120/80H18 [Sport Touring]

PLEASE CALL OR EMAIL US FOR A PRICE QUOTE [on any sizes available]

If you need a different model and/or size BRIDGESTONE tire, please shoot us an email - We can set you up with whatever you need for a good price.

• 100/90V18 + 120/90V18
• 90/90V18 + 110/80V18
• 100/90V19 + 120/90V18
• 90/90V19 + 120/90V18

PLEASE CALL OR EMAIL US FOR A PRICE QUOTE [on any sizes available]

If you need a different model and/or size AVON tire, please shoot us an email - We can set you up with whatever you need for a good price.

Constructed from hex stock Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve).

Cold forged steel - 11 inch size provides excellent leverage. Each set includes 2 tire irons as shown. Another quality MOTION PRO tool.

Tire Iron - 15 inches long and has a curved end for better leverage. Make sure to protect your wheel with some rim protectors!!

Use these rim protectors when you spoon on your tires to those precious rims..... ESPECIALLY if you have the ultra soft BORRANI rims... These things slip over the rim and the point is to have them in between the tire spoons or levers and your rim while you install or remove the tire. Cheap insurance against damage. If you take your tires in to a shop, it is a good idea to take these in with you and demand that the tech use them while doing the job.

Spoke weight kit for your spoked wheels. Usually the tire guys only stock the stick on lead weights which sometimes fall off and always leave sticky crap all over your rim when removed each time you get new tires. Take these in with you and ask them to be used whenever possible - they simply slip over the spoke then slide down onto the nipple to be squeezed in place with pliers. This kit should work for 2 wheels and comes with all weights shown here: [1] 30 gr weight, [2] 20 gr weights and [2] 10 gr weights. This should handle your needs - you can easily trim these down for fine tuning. These are made of malleable lead. I suggest you order 2 kits to start just to be sure you have enough of what you may need.

Rubber rim strip for all 18" and 19" spoked rims with a center rim valve. You should replace these whenever you install a new tube.

This is it folks. Motion Pro has come up with a self sticking ultra tough material rim strip that won't budge once you stick it on and when you take it off there won't be a bunch of junk to clean off either. It comes in a roll with a hole punched for the valve and is long enough to work for all 18" and 19" road and offroad wheels. This is it. Order 1 kit for 1 wheel, 2 kits for 2 wheels.

ROWE spoke wrench - fits all size spokes. Handy tool for those of you with spoke wheel sets.

8 piece metric set includes 1 each large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers. Dependable split collet design Metric sizes to allow use with metric applications. This is the tool that I have raved about that I purchased in 1992 for $120.....

This kit makes wheel bearing removal literally a 20 second operation. And the best part of it is that it drives the bearing straight out so your wheel will not get ruined. Stop using a drift to pound out your bearings.... Another high quality MOTION PRO tool.