 |
 |
 |
| TAV08 - Bevel drive & camshafts | ||||
|---|---|---|---|---|
| Drawing Number | Part Code | Part Name | Description | Quantity |
| TAV08.01 | 0755.29.185 | Sleeve | id17 x od22 x 35 (normal) | 2 |
| TAV08.01 | 0755.29.186 | Sleeve | 0.01 undersize | 2 |
| TAV08.01 | 0755.29.187 | Sleeve | 0.015 undersize | 2 |
| TAV08.01 | 0755.29.188 | Sleeve | 0.02 undersize | 2 |
| TAV08.02 | 73500.1747 | Circlip | 17E | 6 |
| TAV08.03 | 0150.92.050 | Screw | M6x30 | 4 |
| TAV08.04 | 0400.29.050 | Nut | (14x1M SIN.)x6 | 2 |
| TAV08.05 | 0400.29.040 | Washer | id14.5 | 2 |
| TAV08.06 | 0400.29.020 | Woodruff key | 3x5 | 4 |
| TAV08.07 | 0775.29.010 | Camshaft | vertical L=132.5 | 1 |
| TAV08.08 | 0759.29.600 | Bevel gear - upper | Z=21-28 | 2 |
| TAV08.09 | 0759.29.110 | Washer | id17.45 x od25 x 0.05 | 2 |
| TAV08.09 | 0755.29.095 | Washer | id17.45 x od25 x 0.1 | 2 |
| TAV08.09 | 0755.29.105 | Washer | id17.45 x od25 x 0.2 | 2 |
| TAV08.09 | 0755.29.115 | Washer | id17.45 x od25 x 0.5 | 2 |
| TAV08.09 | 0759.29.115 | Washer | id17.45 x od25 x 1.5 | 2 |
| TAV08.10 | 75243.1747 | Bearing (ball) - bevel shaft | id17 x od40 x 12 | 2 |
| TAV08.11 | 0755.29.080 | Gasket | 2 | |
| TAV08.12 | 0755.29.085 | Bearing holder | 2 | |
| TAV08.13 | 0400.29.083 | O-ring | 4125HR | 4 |
| TAV08.14 | 0759.29.090 | Tube | 2 | |
| TAV08.15 | 0775.29.020 | Camshaft | horizontal L=155 | 1 |
| TAV08.16 | 0759.29.145 | Pin | 2 | |
| TAV08.17 | 0759.29.700 | Bevel gear - lower | Z=23-23 | 2 |
| TAV08.18 | 0759.29.170 | Gear | 1 | |
| TAV08.19 | 0759.47.040 | Nut | (20x1M)x5.5 | 1 |
| TAV08.20 | 0400.47.030 | Washer - lock | id20.5 | 1 |
| TAV08.21 | 0759.29.180 | Distance piece | h=7.3 | 1 |
| TAV08.22 | 0759.29.175 | Distance piece | h=6.8 | 1 |
| TAV08.23 | 0759.29.190 | Woodruff key | 4x4x25 | 1 |
| TAV08.24 | 0400.29.123 | Washer | id15.5 x od22 x 0.05 | 2 |
| TAV08.24 | 0400.29.124 | Washer | id15.5 x od22 x 0.1 | 2 |
| TAV08.24 | 0400.29.125 | Washer | id15.5 x od22 x 0.2 | 2 |
| TAV08.24 | 0400.29.126 | Washer | id15.5 x od22 x 0.5 | 2 |
| TAV08.25 | 0759.29.165 | Timing gear | Z=36 | 2 |
| TAV08.26 | 73503.3683 | Circlip | 40I | 2 |
| TAV08.27 | 0759.29.055 | Washer | id32 x od39.8 x 0.05 | 2 |
| TAV08.27 | 0759.29.050 | Washer | id32 x od39.8 x 0.1 | 2 |
| TAV08.27 | 0759.29.040 | Washer | id32 x od39.8 x 0.2 | 2 |
| TAV08.27 | 0759.29.045 | Washer | id32 x od39.8 x 0.5 | 2 |
| TAV08.28 | 0759.29.430 | Distance piece | id35 x od40 x 12 | 2 |
| TAV08.29 | 75380.1747 | Bearing (ball) - bevel shaft | id17 x od40 x 12 | 4 |
| TAV08.30 | 0759.29.070 | Gasket | 4 | |
| TAV08.31 | 0759.29.073 | Plate | 0.05 | 2 |
| TAV08.31 | 0759.29.071 | Plate | 0.1 | 2 |
| TAV08.31 | 0759.29.072 | Plate | 0.2 | 2 |
| TAV08.31 | 0759.29.075 | Plate | 0.5 | 2 |
| TAV08.32 | 0759.29.450 | Flange-bush | 2 | |
| TAV08.33 | 71502.1631 | Screw | M6x20 | 8 |