 |
Reservoir
Cap - AP LOCKHEED - New Old Stock
New Old Stock [NOS]
aluminum AP LOCKHEED brake reservoir cap measures 58.5mm OD.
NOTE: these are sold EACH photo shows top and bottom just
for clarification so you know what you are getting is ONLY
the aluminum cap. |
 |
Motul DOT
5.1 Brake Fluid - 500 ml
STANDARDS : FMVSS 116 DOT
5.1 NON SILICONE BASE & DOT 4 & DOT 3 SAE J 1703. Long life
fluid: The high wet boiling point (185°C / 365°F), superior
to DOT 4 (155°C / 311°F mini) and DOT 3 (140°C / 284°F mini)
fluids enables to use this product longer. Indeed, DOT 3 /
DOT 4 and DOT 5.1 brake fluids have the property to absorb
humidity contained in the air, which reduces their boiling
points and consequently security. The wet boiling point is
representative of the fluid after one year of use. |
 |
Brake Fluid
- Galfer DOT 4
Galfer DOT 4 brake fluid is another alternative, and cost
effective too, for use in our bevel drive Ducati, or for
that matter, any brake or clutch system utilizing BREMBO
master cylinders, calipers or slave cylinders. Extremely
high boiling point = 265C |
 |
Brake Shoe
Set - Ducati 250/350/450 Front or Rear Kits
Brake Shoe Set - Ducati
250/350/450 Desmo Rear Kits |
 |
Brake
Adapters - F08 to 40mm spacing for 280mm Rotors
This is a pair of aluminum
brake adapters that allow you to run modern 4 pad BREMBO
calipers with 40mm spacing on forks designed for F08
calipers - if you use a 280mm rotor. Sold in pairs. |
 |
Adapters:
F08 to 65mm Mount for 280mm Rotors
Now available: 65mm mount
Billet Aluminum brake adapters. Order 1 kit and you get 2
adapters. These allow you to run the newer 65mm bolt pattern
Brembo 4 piston brake calipers in place of the Brembo F08
caliper that is found on many of the 1970's and 80's Guzzis,
Ducatis, Laverdas and Cagivas. These are set for 280mm
rotors. |
 |
Brembo
Manifold Plug w/Bleed Nipple
10mm x 1.0 thread - same as
a Brembo banjo bolt. Use this on a manifold instead of the
plug because it has a bleed nipple on it to get rid of air
that is trapped. A nice little add-on. Comes complete as
shown with the plug, bleeder, rubber cap and special crush
washer. |
 |
Brake Pipe
Guide Brake hose
guide - replace your corroded, abused or missing guide with
this part... PLEASE NOTE: This is actually from a LAVERDA
and it is very slightly different that the DUCATI part but
does the same thing and fits.
Ducati #0796.37.760 |
Brake Shoes for Twins |
Brake shoes for
all Ducati twins with drum brakes in the back such as 750GT,
750 Sport, 860 GT/S and 900 GTS.
Ducati #0795.80.800 |
Brembo Brakes & Parts
|
Brembo components
& rebuild parts for F08, F05 etc
This link goes to a page with
ALL the various BREMBO rebuild and kit brake parts we stock.
Click the image to see
what we have in stock |
Cast Iron Brake Rotors |
Brake Rotors.
Cast Iron, drilled etc. 4 and 6 bolt versions
available for various bevel drive twins drilled and solid. |
Rear Brake Cables |
Rear brake
cable assemblies for 750 GT, 750 Sport, 860 GT and 900 GTS
models. Includes brake switch and adjuster nut. |
New Master Cylinders |
Brembo front
and rear master
cylinders - brakes and clutch.
Remote reservoir as well as
REC [shown] and rear master cylinders in stock. |
Brembo Calipers |
Brembo
Calipers
New F08, P108, 30/34G, P34G
gold or black calipers available. Click foto for
details. |
SS brake line kits |
Front and rear
stainless
steel braided brake line kits for most bevel drive Ducati
models. IN STOCK with a black plastic coating or
clear, all other color combos available by special order
of course. Banjo ends and bolts are stainless steel. Made by GALFER.
Also, click the image to
see the rigid tubes that went between the F08 caliper and
rubber brake hose. I also make stainless kits to
attach to these. |
Brake Light Switches |
Replacement Hydraulic Brake Switches - fit BREMBO brakes - kits to
take place of a single or dual banjo bolt as well as the plug
style used on splitters etc.
|
|
Brembo Racing
"LCF 600 plus" brake fluid - 500ml bottle.
Dry boiling point of 316 degC, wet 204 degC.
Compatible with DOT3 and 4 fluids. Perfect for
natural rubber Brembo seals. |
Caliper Hanger Kit
|
The kit comes with everything
you need to locate a rear F08 Brembo caliper under the swingarm. |
