|
Header Pipe - Ducati 175cc,
200cc, 250cc & 350 Sebring
Chromed steel exhaust header
pipe [right side] to fit all Ducati 175, 200, 250 and 350
Sebring.
Ducati #0400.84.023 |
|
Header Pipe - Ducati 350/450
Desmo, MK3 & Jupiter
Chromed steel exhaust header
pipe [right side] to fit all Ducati 350 and 450 desmos, MK3 and
Jupiter.
Ducati #0615.84.020 |
|
Exhaust Bracket Mounts Kit -
Stainless 7/16 UNF Hex Screws + Washers
stainless hex bolt and washer kit
for mounting your CONTI mufflers etc to your frame. Yes these
are the 7/16 UNF as per original but in stainless. Order 1 kit
and you get 2 bolts and 2 washers. Fits all bevel twins.
Ducati #0755.84.070 &
0755.84.070 |
|
Exhaust Nut To Pipe Reinforcing
Ring - Stainless Steel
This stainless steel ring slips
over your bevel drive twin's exhaust header pipe before you slip
on the nut that threads into the head. We found that lots of
bikes are either missing the reinforcing ring, or, what is on
there is too thin to do the job. Se we made a batch of them out
of 2.5mm thick stainless steel. ID = 42.5mm and OD = 48.6mm. |
|
KREEM Blue Shield - Protect Your
Chrome Exhaust Pipes
Use this stuff on the INSIDE of
your chrome exhaust pipes to protect the outside from turning
blue. This stuff really does work. This is a heat dispersing
coating for the inside of your pipes. 1 pint. |
|
Keihan "Conti Replica" Exhaust System -
500/600 Pantah
The CONTI REPLICA is a complete
stainless steel system, ready to bolt on to your bike with no
modifications required. Simply remove your old system and install this
one in it's place. This kit is only available as a complete system and
includes 2 silencers, brackets, crossover pipe, front and rear head
pipes and 4 clamps... Made by Keihan in the UK, these exhaust systems
are made completely of stainless steel, and are backed by a 10 year
warranty. The silencers sound and look very much like the original
CONTIs and believe me, they sound great. Keihan has been in the business
of making high quality stainless steel exhaust systems for years. Choose
your shipping destination from the drop down menu. If you are in the UK,
you MUST pay the VAT as indicated below as your system will be drop
shipped from the UK to you..... NOTE: you may be billed for customs
import duties due etc. by the shipper - if this happens you will be
responsible to pay. This is beyond our control and I have no idea if it
will actually happen or not...... These systems will drop ship directly
from the Keihan factory in the UK to you when you complete your order.
THANK YOU! |
|
Keihan "Conti Replica" Exhaust System -
SPORT 1000 BIPOSTO [no fairing, dual shock & silver wheel models]
The CONTI REPLICA is a complete stainless
steel system, ready to bolt on to your later Sport 1000 Biposto Ducati
Sport Classic [straight swingarm dual shocks, NO FAIRING and SILVER
WHEELS model] with no modifications required. Simply remove your old
system and install this one in it's place. The kits includes the
silencers, brackets, pipes etc etc... Everything. The exhaust pipes
include a threaded boss to take the gas flow sensor. You may also
purchase ONLY the silencers and related hardware if you like, and they
will work with the stock exhaust pipes. However, these mufflers are
stainless steel and will look slightly different than the original pipes
- keep this in mind if you decide to go that route. The slip on Conti
Replica kit includes the silencers, brackets and clamps and bolts right
on to your stock exhaust pipes with no modification required. Made by
Keihan in the UK, these exhaust systems are made completely of stainless
steel, and are backed by a 10 year warranty. These silencers are based
on their Conti Replica kit which have been in production for years made
for bevel drives and believe me, they sound great. Keihan has been in
the business of making high quality stainless steel exhaust systems for
years. Choose your shipping destination and also choose if you want to
buy a full system or just the slip on system. If you are in the UK, you
MUST pay the VAT as indicated below as your system will be drop shipped
from the UK to you..... NOTE: you may be billed for customs import
duties due etc. by the shipper - if this happens you will be responsible
to pay. This is beyond my control and I have no idea if it will actually
happen or not...... These systems will drop ship directly from the
Keihan factory in the UK to you when complete. These systems are ready
to ship. THANK YOU! |
|
Keihan "Conti Replica" Exhaust System -
SPORT 1000S [dual shock & black wheel models]
The CONTI REPLICA is a complete stainless
steel system, ready to bolt on to your later Ducati 1000S SPORT CLASSIC
[straight swingarm dual shock with fairing and black wheel model] with
no modifications required. Simply remove your old system and install
this one in it's place. The kits includes the silencers, brackets, pipes
etc etc... Everything. The exhaust pipes include a threaded boss to take
the gas flow sensor. You may also purchase ONLY the silencers and
related hardware if you like, and they will work with the stock exhaust
pipes. However, these mufflers are stainless steel and will look
slightly different than the original pipes - keep this in mind if you
decide to go that route. The slip on Conti Replica kit includes the
silencers, brackets and clamps and bolts right on to your stock exhaust
pipes with no modification required. Made by Keihan in the UK, these
exhaust systems are made completely of stainless steel, and are backed
by a 10 year warranty. These silencers are based on their Conti Replica
kit which have been in production for years made for bevel drives and
believe me, they sound great. Keihan has been in the business of making
high quality stainless steel exhaust systems for years. Choose your
shipping destination and also choose if you want to buy a full system or
just the slip on system. If you are in the UK, you MUST pay the VAT as
indicated below as your system will be drop shipped from the UK to
you..... NOTE: you may be billed for customs import duties due etc. by
the shipper - if this happens you will be responsible to pay. This is
beyond my control and I have no idea if it will actually happen or
not...... These systems will drop ship directly from the Keihan factory
in the UK to you when complete. These systems are ready to ship. THANK
YOU! |
Keihan SS exhaust
system |
KEIHAN
complete stainless steel exhaust system for squarecase
Ducati bevel drives.
NEW - roundcase 750
kits now available!!!
headers, crossover,
clamps & mufflers - 10 year guarantee!
Click
Image for details
|
|
Keihan 'Conti Replica' Exhaust
System - GT1000
The CONTI REPLICA is a complete
stainless steel system, ready to bolt on to your 2007 Ducati GT1000
SPORT CLASSIC with no modifications required. Simply remove your old
system and install this one in it's place. The kits includes the
silencers, brackets, pipes etc etc... Everything. The exhaust pipes
include a threaded boss to take the gas flow sensor. You may also
purchase ONLY the silencers and related hardware if you like, and they
will work with the stock exhaust pipes. However, these mufflers are
stainless steel and will look slightly different than the original pipes
- keep this in mind if you decide to go that route. The slip on Conti
Replica kit includes the silencers, brackets and clamps and bolts right
on to your stock exhaust pipes with no modification required. Made by
Keihan in the UK, these exhaust systems are made completely of stainless
steel, and are backed by a 10 year warranty. These silencers are based
on their Conti Replica kit which have been in production for years made
for bevel drives and believe me, they sound great. Keihan has been in
the business of making high quality stainless steel exhaust systems for
years. Choose your shipping destination and also choose if you want to
buy a full system or just the slip on system. If you are in the UK, you
MUST pay the VAT as indicated below as your system will be drop shipped
from the UK to you..... NOTE: you may be billed for customs import
duties due etc. by the shipper - if this happens you will be responsible
to pay. This is beyond my control and I have no idea if it will actually
happen or not...... These systems will drop ship directly from the
Keihan factory in the UK to you when complete. These systems are ready
to ship. THANK YOU!
-> Click
Image for details |
Exhaust Nuts - twins |
NEW exhaust nuts for all bevel drive
twins. Chromed brass nuts with 4 holes so you can safety wire them
in place as you should always do..... |
Exhaust Nuts - singles |
Exhaust nut
for all Ducati OHC single cylinder bikes 175cc - 450cc. Well
made product. Ducati
#0601.84.010 |
|
Exhaust Heat Shield
Exhaust heat shield for high IMOLA
style pipes as found on some 750 & 900SS bevel drive racebikes. These
are VERY high quality pre curved chromed steel shields which measure 3"
wide x 13.5" long. Each shield comes with 2 allen bolts, 2 washers and 2
acorn nuts which can be mounted wherever you want [the bolts do not have
to go any specific place. Sold EACH. |
Pa-Ri SS exhaust clamps |
"Pa-Ri" Stainless exhaust clamps,
38mm for singles, 45mm
and 48mm dia. for twins
THE nicest I have ever
seen. These can be polished up to a mirror finish in no time
if desired. Very well made, finish is excellent.
NEW 38mm Pa-Ri clamps for Ducati
singles are here
|
45 & 48mm Exhaust Clamps |
45mm & 48mm Stainless Steel
exhaust clamps. VERY sturdy and nice items. 45mm for stock pipes,
some CONTI mufflers need the 48mm size - specify your needs!
|
Exhaust Gaskets - twins |
Exhaust gaskets suitable for all
bevel drive twins; 750, 860 & 900 cc. These go between
the exhaust nut and the head.
Ducati # 0755.84.030
|
Exhaust Gaskets - singles |
Exhaust gasket for all single
cylinder DUCATI motorcycles 175cc - 450cc. M36 x 46
Ducati #0400.84.030 |