Bevel Heaven Product Information


:: HOME :: Product Info > Chassis > Purchase These Products HERE ::

Chassis Related Parts etc
Steering Damper Fork Tube Clamp - 35mm & 38mm sizes Available

This is a fork tube clamp used to easily connect your steering damper to the forks. Some bikes don't have a hole in the lower triple clamp for this or the damper might hit bodywork etc so this is your installation answer. Available for 35mm forks as well as 38mm forks. Comes with an allen wrench for installing.

Race Tech GOLD VALVE cartridge Fork System - 38mm Marzocchi & Ceriani Forks

Finally we got the proper Race Tech Gold Valve for our 38mm Marzocchi and Ceriani bevel drive forks. The kit comes with Race Tech's own instructional installation video etc. Please Note: You will need to machine spacers to fit these down into your forks due to the complexity of the fork internals. Someday hopefully someone will furnish us with some engineering drawings so that we can have them made and provide a drop in kit, but until that day - understand that you need to do some thinking and machining on your own to install these gold valves.

We found some install info - please see this web page http://www.laverdamania.net/emulatorgb.htm

Steering Damper Kit - Friction Type - 250/350/450 & Bevel Twins

This steering friction type steering damper kit inserts inside the steering tube of 900 Super Sports and bevel drive Singles. The 7mm rod is 11 3/8" long and the kit comes complete with what you see in the photo, ready with everything needed to install on your bike.

Swingarm Pins ~ standard and oversize pins for all bevel drive twins and singles available. 

28mm for DARMAH and GTS, 29mm for NC/WC singles, 750GT/Sport, 750/900SS & MHR

Oversize?  .003" larger dia than stock, for you guys with bushings with only slight wear.  Just clean everything up and carefully drive them in.  That's it. 

Swingarm Bushing kits available for all bevel drive twins. Specify which kit you need, either:
  • #0620.40.320 ~ fits: 750/900SS, Sport, MHR, 750GT with 29mm pin
  • #0960.40.320 ~ fits: Darmah, 860 GT/S with 28mm pin
Sealer Ring For Marzocchi Damper Rod Bolt

This is a special sealer ring - metal washer on the outside, around the inside is a rubber seal. This goes on the damper rod bolt - at the bottom of your Marzocchi forks - it seals this bolt up that holds the forks together. Sold EACH - you need 2 for your forks, 1 per fork leg.

Ducati #0689.37.535

Race Tech G2-R Gold Valve Cartridge Fork System + Installation Video

This is Race Tech's updated Gold Valve Cartridge Fork System + Installation Video which fits just about all late model bikes with cartridge forks. For instance Ducati; 916, 996, 998, 999, 748, 749, 848, 1098, 900E, .... Also fits Buell, Aprilia, Honda CBR, VFR, .... Kawasaki ZX series, Suzuki GSX-R series 1994+, Yamaha YZF-R series 1996+ The G2R kit is designed to optimize the loading of the shims while improving flow. These dual port pistons were created with both advantages of the Type 1 and Type 2 Gold Valves.

Bitubo 13" (330mm) Adjustable Preload & Rebound Shocks for your Bevel Drive Ducati

[other lengths available as well]

These shocks are made in Italy by BITUBO and feature chrome bodies, chrome springs, adjustable (threaded) spring preload collar, adjustable rebound damping and they also come with multiple collars for installation on several size mounting bolts including for Ducati, Moto Guzzi etc. These are a well made 1 size fits all option at a reasonable price.

Fork Brace - TAROZZI 38mm Marzocchi

TAROZZI fork brace #195 fits 38mm Marzocchi forks from bevel drive Ducati. Made in Italy.

Center Stand Bumper Kit

These 2 little delrin pieces slip into your center stand and provide a cushion between it and the frame so when you ride along they are not banging together. You can either tap them in place, or use some silicone to glue them in place... Either way, you may need to clean out the holes first with a drill bit.

Ducati #0823.12.160

* SD & SSD Darmah Case Saver Kit*

DARMAH Kit replaces DUCATI part #0801.91.070
"BUFFER" see TAV22.29 DARMAH PARTS MANUAL

The Bevel Heaven Case Saver Kit

This is the first product I produced for bevel drive Ducati bikes.  This keeps your drive chain from grinding into your case.  It really does work.  In the past 7 years I have made more than a thousand of these things.  Kits for ALL bevel drive twins available, click image for details.


Swingarm Protector
Delrin sleeve to keep the chain from grinding into your swingarm.  Fits all SS/GT frames.  Can be easily modified to fit DARMAH/GTS frames by filing the swingarm cutout area.  The perfect companion to my case saver kit.

These are now made of BLACK delrin

Click Image For Details

Steering Damper - Darmah etc

This steering damper is as close as we could find to replace that old damper on your Darmah. It is adjustable and looks 99% the same as OEM.

Pillion Pegs - Folding 7/16" [11mm] 900SS etc

These passenger pegs look GREAT on your bevel drive 900SS but fit all bevel drive twins. THey are very well machined aluminum with steel threaded part and nut. They snap closed or open with a good solid feel and look great next to the original solid footpegs.

Triple Clamp Complete - 38mm Marzocchi

WOW! this is a complete triple clamp assembly with a smooth top triple clamp piece. It can be used on a 1972-3 750 Sport [leading axle Marzocchi] or 900 Super Sport [center axle marzocchi]. This means it can also be used on the leading axle Marzocchi forks on your 1972-3 750GT if you are wishing to 'sport' out your GT with clipons etc. This is a high quality cast aluminum reproduction part and comes with the 3 pinch bolts on the top and 2 pinch bolts on the bottom as shown.

Triple Clamp Top Piece - 38mm Marzocchi

WOW! this smooth top triple clamp piece is for 1972-3 750 Sport [leading axle Marzocchi] or 900 Super Sport [center axle marzocchi]. This means it will also fit on the leading axle Marzocchi forks on your 1972-3 750GT if you are wishing to 'sport' out your GT with clipons etc. This is a high quality cast aluminum reproduction part and comes with the 3 pinch bolts shown.

Adjustable Preload Fork Cap Kit - 38mm Marzocchi

fork caps with spring pre load adjusters fit all 38mm MARZOCCHI forks. These are the dogs dangles folks. Be the first on your block to sport these on your bevel drive.

Headlight Bracket - 1976-7 900SS

This headlight bracket specifically fits 1976 and 1977 900 Super Sport bevel drives according to the manuf but it more than likely fits other SS models as well. Ready for paint and installation, this bracket bolts onto the frame at the headstock and holds the headlight bucket.

Rearset Kit - Universal

Dr Desmo's excellent rearset kit - minus the brackets for those of you wanting to customize the installation process yourselves. You get what you see.

Rearset Kit - 750 GT

This is a complete bolt on rearset kit for 750GT bevel drive made by Dr Desmo. It includes everything you need as shown.

Installation instructions w/photos - click HERE

Rearset Kit - 860 GT & 860 GTS

This is a complete bolt on rearset kit for 860GT and 860GTS bevel drive made by Dr Desmo. It includes everything you need as shown.

Installation instructions w/photos - click HERE

Brake Stay - GT & Sport - Silver

Aluminum brake stay for 750 GT and 750 Sport, includes stainless steel fasteners as shown. This is 430mm long measured center to center and is a bolt on replacement part that will look great on your bike.

Ducati #0795.40.073

Brake Stay - GT & Sport - Black

Aluminum [anodized black] brake stay for 750 GT and 750 Sport, includes stainless steel fasteners as shown. This is 430mm long measured center to center and is a bolt on replacement part that will look great on your bike.

Ducati #0795.40.073

Steering Head Bearing - 26 / 52 / 15

High quality SKF steering head bearing - fits ALL ducati up to 1997 [1998] models including all bevel drive singles and twins, Pantah, including all belt drive SS and Monster. You need 2 for your bike.

Ducati #0691.91.010

SKF Sprocket Carrier Bearing - disk brake 20/47/14

High quality SKF bearing. This bearing sits inside sprocket carriers for all 900SS, Darmah, 750SS - these ONLY FIT REAR DISK BRAKE APPLICATIONS. Two are required for each sprocket carrier. These DO NOT FIT rear drum brake models such as 750GT, 750 Sport, 860GT, 900GTS.

Ducati #75161.2054

SKF Sprocket Carrier Bearing - drum brake - 25/52/15

High quality SKF bearing. This bearing sits inside sprocket carriers for all bikes with a rear DRUM BRAKE only including models such as 750GT, 750 Sport, 860GT, 900GTS. These will NOT FIT the following; 900SS, Darmah, 750SS - these ONLY FIT REAR DRUM BRAKE HUB APPLICATIONS. Two are required for each sprocket carrier.

Ducati #75120.2566

SKF Wheel Bearing - F spoked and all MAGs - 20/42/16

High quality SKF wheel bearing. Fits ALL spoke front wheels from 750GT, 750 Sport, 750SS, 860GT, 900GTS, 900SS etc. Also fits all front and rear mag wheels [FPS etc] on bevel drives using a 20 x 42 x 16mm bearing.

Ducati #75163.2054

SKF Wheel Bearing - all R drum - 17/40/17.5

High quality SKF wheel bearing. Fits ALL spoked rear wheels from 750GT, 750 Sport, 750SS, 860GT, 900GTS, etc with DRUM BRAKES only. Also, the factory manual is INCORRECT where it states that you need a 17 x 40 x 12mm bearing - you need THIS SIZE. This is a 17 x 40 x 17.5mm bearing. This will NOT FIT mag wheels, front spoked wheels or disk brake rear wheels..........75400.1747

Neiman Lock + ROUND KEYS - NOS unit

genuine NEIMAN lock used for steering locks, seat locks etc NEW OLD STOCK with the old skool ROUND KEY this is just the lock and 2 keys [no cover or spring].

Neiman Lock with Oval Cover

genuine NEIMAN lock used for steering locks, seat locks etc. This kit comes with an oval cover, 2 keys, rivit for the cover, lock assembly and spring - everything you need....

* Removal Instructions - click HERE or HERE

Neiman Lock with Round Cover

genuine NEIMAN lock used for steering locks, seat locks etc. This kit comes with a round cover, 2 keys, rivit for the cover, lock assembly and spring - everything you need....

* Removal Instructions - click HERE or HERE

Footpeg Set - stainless - fixed

11mm [7/16 UNF] threaded FIXED footpeg set for bevel drive twins and singles made from stainless steel, specifically fits 1975-76 SS. Please note some other models had either 2 folding, or 1 fixed/1 folding sets. Install whichever you want though, these *will* fit all but the last MHR S2, 1982 SS etc which had a 12mm thread. Please choose your kit carefully.


Steering Stem Nuts
Ceriani style shown
2 different style steering stem nuts - for 38mm Ceriani as well as for 38mm Marzocchi forks.

Click Image For Details

Center Stand Bolts for all Bevel and Pantah Twins.  Set includes 2 stainless steel bolts & 2 stainless steel nylock nuts.  If you are having trouble getting your bike up on the stand chances are you need new bolts...

Ducati #0795.12.010


Center Stand Spring
Center Stand Springs for ALL bevel drives.  Also side stand springs [yes they are different].

These are both stainless steel springs now


F&R Axle Nuts/Washers
New axle nuts and washers for all bevel drive twins with disk brakes.  Washers are hardened steel.  Nuts and washers are zinc coated steel.  Set includes 2 each washers and nuts

Ducati #795.77.320 & #795.77.310


Front Axle
Front Axle - NOS - fits all bevel drives with 38mm Marzocchi as well as 38mm Ceriani forks.  Has pull handle for easy removal, CAD plating is bright and shiny, genuine item.

Ducati # 0795.77.330
[direct replacement for #797.77.334 which is the style without the pull rod]

Axle - Rear - All Disk Brake Bevel Twins

NOS rear axle for ALL bevel drive twins with a disk brake. This is a genuine item in perfect condition, ready to install.

Ducati #0797.80.470

Speedo Drive Tab Washer

This is the tab washer that attaches to your VEGLIA speedo drive, the thing that has the little tab that sticks into the hole in your wheel and always seems to break off. Finally.


Speedo Drive Washer
Stainless Steel replacement speedometer drive washer - goes on the front axle between the speedo drive and your fork.  Get rid of that crushed aluminum washer! Fits ALL bevel twins.

Pillion Pegs
Replacement pillion pegs [passenger pegs] for all DUCATI bevel drives.  These are new and nicely made items - a few options for you...

Click Image For Details

Click HERE for more info about WORKS PERFORMANCE
Shocks & Fork Springs
We have developed the perfect combination of shocks and fork springs to give your bevel drive the best ride possible.

Click Image For Details

Dual rate fork spring kit for your bevel drive.  This is the best single thing you can do to improve your 38mm Marzocchi or Ceriani front end on your bevel drive.  Combine this with a set of my dual rate shocks and you will transform the handling on your bevel.  Kits for all yrs and models available. 

Click Image For Details


Chains & Sprockets
Sprockets, Chains by DID, RK & Regina.  Sprockets by Sprocket Specialists - THE BEST sprockets available bar none.

Click Image For Details

    

Website © Frogman Enterprises 2000-present,  All Rights Reserved